IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Switching the system on
G Press 2 STANDBY ON.
➜ The system will switch to the last selected
source.
G Press CD, TUNER, TAPE or AUX on the
remote control.
➜ The system will switch to the selected source.
Switch the system to Eco Power
Standby mode
G Press 2 STANDBY ON.
➜ "ECO PWR" will be displayed, then the display
screen will go blank.
➜ The ECO POWER LED will be lighted.
G To view clock time in standby mode. Press and
hold STANDBY ON for more than 3 seconds,
the clock time is displayed dimly.
➜ The Eco Power indicator goes off.
G If in recording mode, press STOP 9 first.
➜ The volume level(up to a maximum volume
level of 20), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.
Basic Functions
Power Saving Automatic Standby
As a power-saving feature, the system
automatically switches to Eco standby 15
minutes after a tape or CD has reached the end
and no control is operated.
Adjusting volume and sound
1
Press VOLUME-/+ to decrease to increase
volume on the system.
➜ Display shows the volume level VOL and a
number from MIN1, 2, ...38, 39 MAX.
2
Press DSC repeatedly to select the desired
sound effect: CLASSIC/ JAZZ/ ROCK/
OPTIMAL.
3
Press DBB to switch bass enhancement on or
off.
➜ Display shows: DBB ON or DBB OFF.
4
Press IS on the remote control to switch the
surround sound effect on or off.
➜ Display shows: IS ON or IS OFF.
Note:
– The effect of INCREDIBLE SURROUND may
vary with different types of music.
5
Press MUTE on the remote
control to interrupt sound
reproduction instantly.
➜ Playback will continue
without sound and the display
shows MUTE.
G To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
11