Table of Contents
Advertisement
Selecting a different track
G Press
or
once or repeatedly until the
desired track number appears in the display.
G If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press
to start playback.
Finding a passage within a track
(CD disc only)
1
Press and hold down on
➜ The disc is played at high speed and low
volume.
2
When you recognise the passage you want,
release
or
.
➜ Normal playback continues.
Note:
– During a disc programme or if SHUFFLE/
REPEAT active, searching is only possible within the
same track.
Selecting a desired ALBUM/
TITLE (Track) (MP3 disc only)
To select a desired Album
G Press
(11 or 22 on the remote
or
control) repeatedly.
To select a desired Title(Track)
G Press
(¡ or ™ on the remote control)
or
repeatedly.
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before playback. The REPEAT modes can
also be combined with PROGRAM.
SHUFFLE ............ tracks of the entire disc are
played in random order
SHUFFLE and REPEAT ALL...to repeat the
entire disc continuously in
random order
REPEAT ALL .... repeats the entire disc/ program
REPEAT ............... plays the current track
continuously
1
To select your play mode, press the SHUFFLE
or REPEAT on the remote control before
playback until the display shows the desired
function. (SHUF, REPEAT, REPEAT ALL)
2
3
G You can also press STOP 9 to cancel your play
or
.
1
2
3
4
5
G pressing STOP 9 twice during playback;
G opening the CD compartment;
G selecting another sound source
CD/ MP3-CD Operation
Press
to start playback if in the STOP
position.
To return to normal playback, press the
respective SHUFFLE or REPEAT button until
the various SHUFFLE / REPEAT modes are no
longer displayed.
mode.
Note:
– If Shuffle is activated on a MP3-CD, all titles
stored in the disc will be played in random order.
Programming track numbers
Program in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
40 tracks can be stored in the memory.
Press PROG/ REV (or PROGRAM/ REV on
remote control) to enter the programming
mode.
➜ A track number is shown and
flashes.
(11 or 22 on the remote
Use the
or
control) to select your desired track number.
Press PROG/ REV (or PROGRAM/ REV on
remote control) to confirm the track number to
be stored.
➜ The number of tracks programmed is shown.
Repeat steps 2-3 to select and store all desired
tracks.
➜ MEMORY FULL is displayed if you attempt to
program more than 40 tracks.
To start playback of your disc program, press
STOP 9 followed by
Erasing the program
You can erase the program by:
➜
disappears from the display.
PROGRAM
PROGRAM
or press
directly.
13
Hide quick links:
Advertisement
Table of Contents
