Basic Functions; Switching The System On; Adjusting Volume And Sound - Philips MC235B/05 User Manual

IMPORTANT!
Before you operate the system, complete
the preparation procedures.

Switching the system on

● Press STANDBY-ON / 2.
➜ The system will switch to the last selected
source.
● Press SOURCE (or CD, TUNER or AUX on
the remote control).
➜ The system will switch to the selected source.
● Press OPEN • CLOSEç.
To switch the system to standby mode
● Press STANDBY -ON 2

Basic Functions

Adjusting volume and sound

Press the VOLUME 3 / 4 (+/-) control to
1
decrease or increase the volume.
➜ Display shows the volume level VOL and a
number from MIN1, 2, ...30, 31 MAX.
2
Press DSC repeatedly to select the desired
sound effect: ROCK/ JAZZ/ POP/ CLASSIC.
3
Press DBB to switch bass enhancement on or
off.
➜ Display shows: DBB.
4
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜ Playback will continue without sound and the
display shows MUTE.
● To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
11