Maintenance And Cleaning; After-Sales Service And Application Service - Bosch Active Line Manual

For batavus
Hide thumbs Also See for Active Line:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 35
English–4
Maintenance and Service

Maintenance and Cleaning

When changing the bulbs, ensure that the bulbs are compati-
ble with the Bosch eBike system (ask your bicycle dealer) and
that the specified voltage matches. Bulbs must be replaced
only with bulbs of the same voltage.
Do not immerse any components, including the drive unit, in
water or clean them with pressurised water.
Have your eBike system checked by an expert at least once a
year (including mechanical parts, up-to-dateness of system
software).
For service or repairs on the eBike, please refer to an author-
ised bicycle dealer.

After-sales Service and Application Service

In case of questions concerning the eBike system and its com-
ponents, please refer to an authorised Bosch eBike dealer.
For contact data of authorised Bosch eBike dealers, please
refer to www.bosch-ebike.com
0 275 007 ADC | (1.4.16)
Disposal
The drive unit, on-board computer including operat-
ing unit, battery pack, speed sensor, accessories and
packaging should be disposed of in an environmen-
tally correct manner.
Do not dispose of eBikes and their components into house-
hold waste!
Only for EC countries:
According to the European Guideline
2012/19/EU, electrical devices/tools that are
no longer usable, and according to the European
Guideline 2006/66/EC, defective or used bat-
tery packs/batteries, must be collected sepa-
rately and disposed of in an environmentally cor-
rect manner.
Subject to change without notice.
Bosch eBike Systems

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents