Notes Before Operation; Notes Concerning Use; Assembling The Boat Stand; Antenna Tube Assembly - Carson Speed Shark Brushless Instruction Manual

NOTES BEFORE OPERATION

1. The propellers of the boat rotate extremely quickly These must
not be touched under any circumstances, since there is a risk of
injury
2. The instructions must be read in full and noted before use.

NOTES CONCERNING USE

Cabin top
Hull
Water cooling outlet

ASSEMBLING THE BOAT STAND

Assembly the boat stand as shown in the illustration
Glue the ends using normal wood glue (Not included)

ANTENNA TUBE ASSEMBLY

Lead the end of the antenna cable through the opening in the hull.
Now slide the antenna tube over the antenna and fix it in the hull.
Finally, fit the water-tight rubber closure to the antenna tube.
3. Keep the model boat away from children.
4. The range of the model is approx. 50 metres. Take care not to
lose control of your model.
Cabin top catch
Before first use, allow the adhesive to harden properly
Steering motor
Rudder steering
Guide rudder
Propeller
19 // GB