Important information Documentation Possible risk of danger of serious injury or death These Installation and Operating Instructions – CAUTION form an integral part of the unit� They con- Risk of danger of minor injuries form to the relevant version of the equip- –...
Important information Safety Notes on copyright All circuits, processes, names, software and Dürr Dental has designed and constructed appliances quoted are protected under in- this appliance so that when used correctly dustrial property rights� there is no danger to people or property� Any reprinting of the technical documenta- Nevertheless, there are residual risks�...
Important information General safety notes Protection against electrical current • Before using the appliance observe any and all guidelines, laws, regulations and • When working on and with the appliance other restrictions which may apply to the always observe the local electrical safety appliance�...
Important information Only use original parts Transport • Only use accessories and special acces- The original packaging offers the optimum sories stipulated or approved by Dürr protection for the appliance during trans- Dental� port� • Only use original working parts and spare If required, the original packaging for the parts�...
Product description Technical data Power unit Power supply type Poly Interchangeable Head Manufacturer GlobTek Polymerisation lamp Inc� Light source LEDs Model GTM41076- 0612-X�X Wavelength Light intensity Electrical data of power unit 1000 Nominal voltage V AC 100 - 240 Diameter of the optics Electrical frequency 47 - 63...
Product description Function After every 5 seconds the handpiece vi- brates once and there is an audible signal� After 20 seconds the handpiece vibrates twice, there is a repeated audible signal (2x) and the appliance automatically switches off� Light protection Optical element with LED located direct- ly behind Poly interchangeable head...
Mounting Installation Connecting up the device The power supplied via the USB-connecting Safe connection of appliance cable of the VistaCam iX for the camera in- terchangeable head is not sufficient for the Danger can arise when connecting units Poly interchangeable head� Therefore the with each other or to parts of the system handpiece must be connected to the (e�g�...
Page 12
Mounting • Connect the connecting cable to the camera� • If the appliance is to be used with other interchangeable heads, connect the handpiece using the USB-combination connector to a computer� • Plug the power unit into the mains supply socket�...
Usage Instructions for use Slide interchangeable head on • Ensure that the handpiece and the inter- changeable head are completely dry� WARNING • Hold the interchangeable head and the Injury through light sensitivity handpiece such that the optical element is •...
Page 14
Usage • Hold the camera such that the optical ele- • Hold the disposable protective sheath ment is facing down� firmly at the white edging and pull the transparent plastic side in the direction of • Lift the white edge to the disposable pro- the camera head�...
Usage Using the appliance • Place the light protector from above onto the interchangeable head� Carefully en- sure that the light protector itself does not obscure the optical element of the inter- changeable head� CAUTION Radiated light can damage the eyes •...
Page 16
Usage Establish exposure times The polymerisation lamp begins to light The exposure time is dependent on the up� dental materials being employed� It lights for max� 20 seconds� After every Where the distance between the polymeri- 5 seconds the handpiece vibrates once sation lamp and the dental material is great- and there is an audible signal�...
Usage Cleaning and Prepare light protector disinfecting Dürr Dental has verified the suitability of the following instructions for preparing the prod- uct for further use� Cleaning and disinfecting of Preparation process: interchangeable head 1� Cleaning and disinfection (automatic or Use the following cleaning and disinfectant manual) agents as disinfectant wipes: 2�...
Usage Function control • Remove coarse impurities with a dispos- able disinfectant wipe (e�g� FD 350)� Check light intensity • Place the product completely immersed in an instrument disinfection and cleaning The light intensity can be checked using a solution (e�g� ID 212,ID 212 forte, ID 213)� suitable measuring instrument (e�...
Trouble-shooting 10 Tips for Operators and Technicians Repairs above and beyond simple maintenance may only be carried out by a quali- fied technician or one of our service technicians� Problem Probable cause Solution Polymerisation lamp Interchangeable head not cor- • Remove interchangeable does not light rectly in place head and try fitting again�...
Page 24
Hersteller/Manufacturer: DÜRR DENTAL SE Höpfigheimer Str. 17 74321 Bietigheim-Bissingen Germany Fon: +49 7142 705-0 www.duerrdental.com info@duerrdental.com...
Need help?
Do you have a question about the VistaCam iX Poly and is the answer not in the manual?
Questions and answers