Toro Multi Pro 5700-D Service Manual page 145

IMPORTANT: Make sure to remove and neutralize
chemicals from tank and other components before
disassembly. Wear protective clothing, chemical re-
sistant gloves, and eye protection during repair.
Disassembly (Fig. 14)
1. Park machine on a level surface, stop engine, en-
gage parking brake, and remove key from the ignition
switch.
2. Drain spray tank (see Operator's Manual).
3. Label disconnected hoses for proper installation af-
ter repairs are completed.
4. Remove agitation nozzles as required using Figure
14 as a guide. Discard all removed O--rings and gaskets.
Assembly (Fig. 14)
NOTE: Coat all O--rings with vegetable oil before instal-
lation to reduce the chance of damage during assembly.
1. Install agitation nozzles using Figure 14 as a guide.
Replace all removed O--rings and gaskets.
2. Check spray system for leaks.
Multi Pro 5700--D
SERIAL NUMBER BELOW 310000000
1
1. Agitation valve motor
SERIAL NUMBER ABOVE 310000000
1
1. Agitation valve motor
Rev. D
Page 6 - - 17
2
Figure 15
2. Agitation supply hose
2
Figure 16
2. Agitation supply
Spray System