Fuel System Maintenance; Replacing The In-Line Fuel Filter - Toro TimeCutter HD X4850 Operator's Manual

Fuel System
Maintenance
DANGER
In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you and others
and can damage property.
Refer to Adding Fuel (page 16)
list of fuel related precautions.
Replacing the In-Line Fuel
Filter
Service Interval: Every 100 hours/Yearly (whichever
comes first)—Check the in-line fuel
filter.
Every 200 hours/Every 2 years (whichever
comes first)—Replace the in-line fuel filter.
Never install a dirty filter after removing it from the
fuel line.
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Replace the filter
Note:
Note: Ensure that the markings on the
filter follow the fuel flow direction.
for a complete
(Figure 56).
45
Figure 56
g027939
g033082