Toro TimeCutter HD X4850 Operator's Manual page 20

Figure 14
1. Carriage bolt (5/16 x 3/4
inch)
2. Locknut (5/16 inch)
8. Remove the 2 locknuts (5/16 inch) to securing
the welded posts of the right baffle to the top of
the mower deck at the center and right of center
positions (Figure 15).
Note:
Remove the right baffle from the mower
deck.
Figure 15
1. Locknut (5/16 inch)
2. Right baffle
9. Locate the cutoff baffle in the loose parts bag
and remove the fasteners at the rear holes of
the discharge plate
3. Right baffle
4. Baffle guard
3. Welded posts (right baffle)
(Figure 16).
g191136
1. Carriage bolts (existing)
2. Rear holes in the
discharge plate
10. Install the baffle at the side discharge opening
on the mower deck.
11. Use the fasteners removed to secure the cutoff
baffle to the deck.
12. Install the mower deck; refer to
Mower Deck (page
Machines with 137 cm (54-inch)
Mower Decks
1. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
g010704
3. Remove the mower deck; refer to
Mower Deck (page
4. Remove the 3 locknuts (5/16 inch) secured to
the welded posts of the left baffle on the top of
the mower deck at the center, left of center, and
left positions
20
Figure 16
3. Cutoff baffle (loose)
4. Locknuts (existing)
Installing the
55).
Removing the
54).
(Figure 17).
g190734