Technical Data - ABB Orion3 Extended Excerpts From The Original Instructions

Technical data

Manufacturer
Address
Electrical data
Power supply:
Active unit consumption (RX):
Outputs:
Short-circuit protection:
Output current
Output voltage – status ON:
Output voltage – status OFF
Capacitive load
Current for external lamp:
Response times:
Protected height:
Electrical protection:
Connections:
Cables length (for power supply):
Pollution degree
Optical data
Emitting light (λ):
Resolution:
Operating distance:
Ambient light rejection:
2TLC172298M0201
2015-09-15
ABB JOKAB SAFETY
Varlabergsvägen 11
SE-434 39 Kungsbacka, Sweden
+24 VDC ± 20 %
2.5 W max (normal operation without load)
2 PNP
1.4 A max at 55 °C
0.5 A max / output
Power supply value less 1 V
0.2 V
2.2 µF at +24 VDC max
20 mA min, 250 mA max
From 11 to 12 ms. See paragraph 12 of the instruction manual
From 500 mm to1200 mm. See paragraph 12 of the
instruction manual.
Class III - use SELV/PELV
M12-8 poles male connector
70 m. max
2
Infrared, LED (860 nm)
See paragraph 12 of the instruction manual.
From 0.5 to 8 m. See paragraph 12 of the instruction manual
According to IEC-61496-2:2013
12 www.abb.com/jokabsafety