Transport And Storage; Approvals - Siemens SITRANS L Series Operating Instructions Manual

Technical data

6.5 Transport and storage

Operating conditions
Relative humidity
Altitude
Expected product lifetime
6.5 Transport and storage
Transport and storage
Transport
Storage
6.6

Approvals

Approvals
General Purpose (Ordinary Locations) (Depending on se-
lected version in price list.)
Hazardous Locations (Depending on selected version in
price list.)
EMC
Food grade material
40
0-100%, suitable for outdoor use
max. 2,000 m (6,562 ft)
Following parameters have a negative influence on the
expected product lifetime:
High ambient- and process temperature, corrosive environ-
ment, high vibration, high flow rate of abrasive bulk material
passing the sensor element.
Observe the instructions as stated on the transport packag-
ing, otherwise the products may get damaged.
Transport temperature: -40 .. +80°C (-40 .. +176°F)
Transport humidity: 20 .. 85%
Transport incoming inspections must be carried out to check
for possible transport damage.
Products must be stored at a dry and clean place. They
must be protected from influence of corrosive environment,
vibration and exposure to direct sunlight.
Storage temperature: -40 .. +80°C (-40 .. +176°F)
Storage humidity: 20 .. 85%
CE EN 61010-1
FM
ATEX Dust explosion
FM Dust explosion
EN 61326 - A1
According to directive 1935/2004/EC
Operating Instructions, 05/2019, A5E44908583-AB
ATEX II 1/2 D Ex
ta/tb IIIC T! Da/Db
Cl. II, III Div. 1 Gr.
E,F,G
SITRANS LVS300