Siemens SITRANS L Series Operating Instructions Manual page 31

If the bulk material is light and has few or no tendency to cake or deposit, the setting can be
set to position "II" or "I" so as to increase the sensitivity of the probe.
The table indicates the approximate min. bulk density depending on the settings.
Please contact manufacturer if you intend to use the device for special purposes.
SITRANS LVS300
Operating Instructions, 05/2019, A5E44908583-AB
Setting Sensitivity/Powder density (ca.)
I High >20 g/l (1.25 lb/ft
II Medium high >80 g/l (5 lb/ft
III* Medium low >150 g/l (9.4 lb/ft
IV Low >300 g/l (18.7 lb/ft
4.2 Sensitivity setting
①
)
3
)
3
)
3
)
3
Operating
31