Installing/mounting
2.9 Assembly of the unit
2. Checking the cable length
Push back the cable into the extension tube until the stated length is present. Take care
that no cable is wound up inside the housing.
If the cables are too long to be pushed back, go to step 3; otherwise go on to step 4.
①
②
18
①
Connecting wire
②
Cable gland
③
Housing
④
Screwed piece
⑤
Extension pipe
⑥
Oscillating piece
⑦
Oscillating rod
Housing
Extension tube
Operating Instructions, 05/2019, A5E44908583-AB
SITRANS LVS300