Confer Plastics ROLLGUARD 7200 Assembly, Installation And Use Manual page 4

STEP 2:
OUTSIDE LADDER
#1: Lay "OL" rail on flat surface.
#6: Lay "OR" rail on flat sur-
face.
4
#3-5: Install 3 more treads, for a total of 4, see above pictures.
#7: Lift/rotate and align tread tabs
to fit into rail openings..
#9: Install
bottom tread.
NOTE: Bottom
tread will not
be flush with
ladder leg.
Tools needed:
rubber mallet
Parts needed:
1- Outside left rail (marked "OL" at the top)
1- Outside right rail (marked "OR" at the top)
5- Ladder treads
Incorrect, do not
block track.
#2: Correct, tap down
until seated, note track is
not blocked..
#8: Tap all 4 treads down
until seated..
#10: Outside
ladder finished!