Advertisement
Quick Links
SAVE THESE INSTRUCTIONS
DEALER/INSTALLER: GIVE TO HOMEOWNER
CONFER ABOVE GROUND
CURVE STEP / ABOVE GROUND
CURVE STEP SYSTEM
ASSEMBLY AND INSTALLATION MANUAL
Model CCX-AG
Model CCX-AG System
Note: 40 lbs. of sand required!
Note: 70 lbs. of sand required!
Made in the U.S.A. by
www.conferladders.com
Advertisement
Related Manuals for Confer Plastics CCX-AG
Summary of Contents for Confer Plastics CCX-AG
- Page 1 DEALER/INSTALLER: GIVE TO HOMEOWNER CONFER ABOVE GROUND CURVE STEP / ABOVE GROUND CURVE STEP SYSTEM ASSEMBLY AND INSTALLATION MANUAL Model CCX-AG Model CCX-AG System Note: 40 lbs. of sand required! Note: 70 lbs. of sand required! Made in the U.S.A. by www.conferladders.com...
- Page 2 2 - Labels-No Jumping/Diving If missing parts call - Toll free U.S. - 800-635-3213 or www.Conferplastics.com Confer Plastics “CURVE” Above Ground Pool Step can be assembled with the treads curved inward or curved outward. Determine which direction you want the steps before starting assembly.
- Page 3 Step 5 Step 6 Install the rest of Tilt the step the curved risers backwards to [C] by flexing the expose all four side panels [A] of the rounded outward enough to tabs on the insert part [C] tabs bottom edges. into part [A].
- Page 4 Step 13 Step 14 To install the lower To install the upper handrail posts [E] first hand rail posts [E] locate the openings on first locate the part [A] just below the openings on panel second tread marked with extension [D] marked #4.
- Page 5 CONFER CURVE STEP ADD-ON INSTRUCTIONS The curve add-on can only be installed on the right side of the step as you are facing it. The add-on requires an additional 30 lbs. of sand. Additional Parts for Step Add-On 1 - Medium flex riser [Part P] 2 - Foot pads [Part H] 1 - Medium curved tread [Part Q] 1 - Add-on panel [Part J]...
- Page 6 CONFER CURVE STEP ADD-ON INSTRUCTIONS (Contʼd.) Step 25 Step 26 Fill Holes At this time add 30 lbs of The next step will require an extra set of hands to help sand through the two fill align the large flex riser [M] and the tread support [N] into holes located on the add-on the groove and the openings located on the bottom side of panel.
- Page 7 CONFER CURVE STEP ADD-ON INSTRUCTIONS (Contʼd.) Install the second tread Repeat step 31 to install Install the long handrail Step 35 Step 33 Step 34 [I] onto the base step the small flex riser [R] post [L] into the upper then place the small slot on add-on panel, slot is marked...
-
Page 8: Safety Information
The Confer Curve Step can be covered, if desired, and stored outdoors. CONFER PLASTICS, INC. FIVE YEAR WARRANTY Confer Plastics, Inc. warrants their swimming pool ladders and steps to be free from defects in workmanship for five years from date of purchase. DO NOT RETURN DEFECTIVE PART TO DEALER E-MAIL CONFER PLASTICS AT: LADDERS@CONFERPLASTICS.COM...