Connect To Wi-Fi (Wireless) Enabled Home Network; Network Settings On Center - Philips Streamium WAS7500/05 User Manual

11.2

Connect to Wi-Fi (wireless) enabled home network

The Wi-Fi enable network is a Wi-Fi infrastructure network or a Wi-Fi enable home network with
a router.
Important! Connections that include a Wi-Fi router require that the router is switched on at
all times.
1 To connect
on or respectively.
2 For music playback within the home network, see 9.3 UPnP Playback.

11.2.1 Network settings on Center (

Note
For WEP(Wired Equivalent Privacy) / WPA (Wi-Fi Protected Access) key setting to secure your
network, always refer to the user manual of the Router.WPA is the newest and strongest
encryption method. If this is not available (generally for older devices) choose WEP.
On , search for networks:
1 Press MENU to enter the menu screen.
3 4
2 Use or and
> Display: Searching for Networks...
List of networks appears. (Network Not Found appears if no network is found.)
3 Select the Wi-Fi network where your desired UPnP device is located.
2
4 Press to continue.
5
If you already know the WEP/WPA
key for the Wi-Fi network:
If there is no WEP/WPA key for the
Wi-Fi network:
6 In screen Set IP Mode, select Automatic
68
or to a Wi-Fi enabled home network, start the Add Network procedure
2
to enter Settings followed by Network, then Wireless.
)
Use the 1-way remote control
to enter the WEP or WPA key.
Press OK to skip.
Press OK to
confirm.
Network settings