Connect To Wired Home Network; Set Network On Center - Philips Streamium WAS7500/05 User Manual

6
If you already know the WEP/WPA
key for the Wi-Fi network:
If there is no WEP/WPA key for the
Wi-Fi network:
7 Select Automatic.
8 As prompted, select YES to apply the settings.
is connected to the Wi-Fi home network.
will be disconnected from the Wi-Fi network of
11.3

Connect to wired home network

The wired home network can be a single PC, a PC network, another
and can both access the wired and wireless home network at the same time. Using an
Ethernet cable (not supplied), you can connect
maintaining its Wi-Fi connection (e.g. the Wi-Fi connection between
the Wi-Fi connection with a home network). In this way, you can opt to play the music library of
the wired network only on
At the same time, you can still enjoy all the music playback features on the Wi-Fi network.

11.3.1 Set network on Center (

1 Check that the network device is switched on.
2 Connect an Ethernet cable (not supplied) to Ethernet ports on network device and
3 Press MENU to enter the menu screen.
3 4
4 Use or and
2
5 Press to continue.
70
or a single
)
2
to enter Settings followed by Network, then Wired.
Use the 1-way remote control
to enter the WEP or WPA key.
Press OK to skip.
.
or a separately to a wired network while
(UPnP playback).
Press OK to
confirm.
or .
and on or more , or
.
Network settings