Connect to Wi-Fi (wireless) enabled home network
The Wi-Fi enable network is a Wi-Fi infrastructure network or a Wi-Fi enable home network with
Important! Connections that include a Wi-Fi router require that the router is switched on at
1 To connect
2 For music playback within the home network, see 9.3 UPnP Playback.
11.2.1 Network settings on Center (
For WEP(Wired Equivalent Privacy) / WPA (Wi-Fi Protected Access) key setting to secure your
network, always refer to the user manual of the Router.WPA is the newest and strongest
encryption method. If this is not available (generally for older devices) choose WEP.
, search for networks:
> Display: Searching for Networks...
List of networks appears. (Network Not Found appears if no network is found.)
3 Select the Wi-Fi network where your desired UPnP device is located.
If you already know the WEP/WPA
key for the Wi-Fi network:
If there is no WEP/WPA key for the
6 In screen Set IP Mode, select Automatic
Downloaded From Disc-Player.com Philips Manuals
to a Wi-Fi enabled home network, start the Add Network procedure
to enter the menu screen.
to enter Settings followed by Network, then Wireless.
Use the 1-way remote control
to enter the WEP or WPA key.