Connecting To External Wi-Fi Network; 1Network Setting On Center - Philips WACS4500 User Manual

9.2 Connecting to external Wi-Fi
network
The external Wi-Fi network can be a single PC
or a PC network.
To connect the Center or Station to an external
Wi-Fi network, start the add networking
procedures on the Center or Station respectively.
For music playback within the external network,
see UPnP: UPnP playback.
9.2.1 Network setting on Center
1
Check that the PC is switched on and the
firewall is switched off.
2
On the Center, search for networks
a. Press MENU to enter the menu screen
b. Press the navigation controls 3 or 4 and 2 to
enter Settings, followed by Network and
Wireless.
c. Press 2 to continue.
➜
The display shows: Searching for Networks
➜
The list of networks appears
➜
The display shows: Network Not Found if no
network is found
9. Network setting
3
a. Select the network where your desired UPnP
device is located.
b. Press 2 to continue
4
If you have already set a WEP/WPA key for the
UPnP device network:
a. Enter the WEP or WPA key by using the
alphanumeric keys (see Preparation: Using
Alphanumeric Keys)
b. Press OK to confirm
If there is no WEP/WPA key for the
UPnP device network:
Press OK to skip
Helpful hint:
– For WEP/WPA key setting, always refer to the
Access Point's user manual.
External Wi-Fi
network
Internet
Wireless Base Station 11g T Wireless Base Station 11g True T rue Turbo urbo
Wireless Modem PC Wireless Modem PC Power Power
DSL modem
Access Point
PC
(UPnP device)
LAN
for illustration only
41 41