Stuart Microcentrifuge 8500 Operator's Manual page 8

This product meets the applicable harmonized standards for radio frequency interference
and may be expected not to interfere with, or be affected by, other equipment with similar
qualifi cations. We cannot be sure that other equipment used in its vicinity will meet these
standards and so we cannot guarantee that interference will not occur in practice. Where
there is a possibility that injury, damage or loss might occur if equipment malfunctions due to radio
frequency interference, or for general advice before use, contact the manufacturer.
This declaration of conformity is issued under the sole responsibility of the manufacturer
The object of the declaration described above is in conformity with the relevant Union Harmonisation Legislation:
References to the relevant harmonised standards used or referen
to which conformity is declared:
IEC/EN 61010-1:2010
IEC/EN 61010-2-020:2016
IEC/EN 61326-1:2013
Cole-Parmer
625 E Bunker Court
Vernon Hills, IL 60061
Toll-free: 1-800-323-4340
Phone: 1-847-549-7600
Fax: 1-847-247-2929
ColeParmer.com
8
1065Y17M_Stuart_Microcentrifuge_Manual_ENGLISH.indd 8
EU Declaration of Conformity
Product Laboratory Equipment
Manufacturer Cole-Parmer
625 East Bunker Court
Vernon Hills
IL 60061
USA
Object of Declaration
Low Voltage Directive
EMC Directive
RoHS Directive
Signed for and on behalf of the above manufacturer
Additional Information
Place of Issue
Date of Issue
Authorised Representative
Title
Signature
Microcentrifuge 8500, SCF4
(reference the attached list of catalogue numbers)
2014/35/EU
2014/30/EU
2011/65/EC
Safety requirements for electrical equipment for
measurement, control and laboratory use.
Part 1: General requirements.
Particular requirements for laboratory centrifuges.
Electrical equipment for measurement, control and
laboratory use. EMC requirements.
Part 1: General requirements (Class A). s.
Year of CE Marking: 2018
Vernon Hills, IL, USA
December 20, 2018
Pete Hadjis
CPVH Product Development Manager
1065Y17M
01/11/2019 3:26:53 PM