Instructions for use UNDERTAKEN BY A QUALIFIED ELECTRICIAN Introduction The wires in the mains cable are coloured as Thank you for purchasing this piece of Stuart follows: equipment. To get the best performance from the equipment and for your own safety, BROWN...
General Description WARNING: When the hotplate surface is hot (>50ºC) the hot warning light will The acid resistant hotplate consists of a begin to flash red. This will continue to ceramic tile and heater assembly mounted in flash while the plate temperature is above 50ºC a block of high grade PTFE.
Service Tel: +44 (0)1785 810475 Department of Cole-Parmer or the point Email: cpservice@coleparmer.com of sale. Web: www.stuart-equipment.com For any other technical enquiries, please contact the Technical Support Department: Email: cptechsupport@coleparmer.com , Tel: +44 (0)1785 810433. Technical Specification...
Page 5
Additional Information Year of CE Marking: 2003 Place of Issue Stone, Staffordshire, UK Date of Issue June 2009. Revised 18 April 2017 Authorised Representative Carl Warren Title Technical Manager Signature Declaration of Conformity is also available to view online at www.stuart-equipment.com...
Page 6
INSPECTION REPORT MODEL CP300 ELECTRICAL SAFETY 1. Earth continuity 2. Insulation 3. Flash test FUNCTIONAL 1. Indicators 2. Heating function 3. Visual acceptance QUALITY CONTROL INSPECTOR...
Page 8
Thank you for reading this data sheet. For pricing or for further information, please contact us at our UK Office, using the details below. UK Office Keison Products, P.O. Box 2124, Chelmsford, Essex, CM1 3UP, England. Tel: +44 (0)330 088 0560 Fax: +44 (0)1245 808399 Email: sales@keison.co.uk...
Need help?
Do you have a question about the CP300 and is the answer not in the manual?
Questions and answers