Table of Contents
Advertisement
Safety Instructions
Before using the equipment, assure that:
•
the tool can be pushed far enough into the chuck
(Test this with a dipstick and clean if necessary.)
•
the inserted tool will not can while clamping it
•
the tool stuck properly in the chuck the tool is approved for
using it at the max. speed (see manufacturer's instructions)
•
the tool is absolutely dry.
Switch off the unit immediately if
•
the bur comes off during the treatment itself.
•
the motor blocks during the treatment.
Empty the unit if it is not in use for a longer period of time, e.g.
before vacations. Clean out the tank. Set the spray function on
maximum. Now start the spray function, and the water will spray
for approx. 3 min. The fluid will be blown out of the complete
spray system and hand piece.
Always follow the operating instructions. Do not carry out any
repairs, modifications or maintenance work yourself. This is only
to be accomplished by an authorized specialist. The mains
cable may also only be changed by the manufacturer or an
authorized specialist. Maintenance records may be supplied to
repair workshops and trained technicians upon request. Never
remove the housing, while the equipment is plugged in as some
components are live. A spare parts list may be supplied to
qualified persons (repair workshops). No responsibility can be
accepted for unauthorized or improper tampering with the unit,
which nullifies the guarantee and any other liabilities.
6
Advertisement
Table of Contents
