Cleaning Function; Cleaning The Chuck; Maintenance Overview - hadewe Hyperios4 CHROME Manual

Maintenance & Care

Cleaning function

Use the cleaning function if the
nozzle is blocked. Turn the unit off
using button 14 (Standby). Remove
the water filter at first. (For its in-
structions see paragraph above.)
Fill the tank with distilled water.
Close the tank and put it back into
the unit.
Adjust the amount of spray (button
(1) on maximum. Now press button
(2) and hold it, until in the display
shows "CLEAN". If requested, you
could cancel the process by push-
ing button (14). The complete
cleaning process will last three
minutes.
During the cleaning process, the
water will be washed out of the
whole spray system. Parts of dirt
are rinsed into the tank. Do not use
this water again, but clean the tank
immediately after realizing a block-
age in the nozzle. Otherwise the dirt
parts might stick together.
Clean the water filter carefully and
put it back in the adapter. Refill the
tank with new water.
Use the cleaning function
only if the nozzle is blocked.
Do not use the function if the
unit works properly.

Cleaning the chuck

Cleaning the chuck is not intended
for Hyperios 4

Maintenance overview

What has to be
done?
changing washer
4571
changing filter
3497
Maintenance by
repair workshop
(changing worn
parts; checking
motor brushes,
housing; cleaning;
check leakage
current)
17
CHROME.
How often?
Done by
whom?
monthly by user
every 6 months
every 500 hours
of operation by
repair workshop