Vaisala Veriteq viewLinc 4.3 Quick Start Manual

Network
Overview
Vaisala Veriteq
viewLinc provides
monitoring, alarming
and real-time
graphing for any PC
or mobile device on
the network.
1

Install viewLinc

To install viewLinc on a dedicated 24x7 server PC:
1. Insert the viewLinc Installation CD and start the Setup Wizard.
Choose an installation language.
a.
b. Review and accept the License Agreement.
c. Specify a destination for the viewLinc program files.
d. Select Enterprise Server.
e. Enter your Installation Key then follow the prompts to accept the
remaining default installation options.
2. Reboot your viewLinc Server machine.
For more detailed instructions and alternate installation options, please refer to the viewLinc User's Guide.
2

Connect Loggers

To connect Loggers using vNet Devices:
1. Remove protective label on bottom or back of the Logger.
2. Connect Logger to the vNet Device.
3. Connect vNet Device to Ethernet outlet and, if not using PoE, the power supply.
To connect an HMT140 Wi-Fi Logger:
1. Ensure the HMT140 Configuration Cable is disconnected from your PC.
2. Open the HMT140 case to ensure the power switch is OFF, then install three
3.6V lithium batteries and turn power switch ON.
3. Connect the HMT140 Configuration Cable to your PC.
To connect Loggers with Digi Devices or 300 Series Transmitters, refer to the specific Device User's Guide.
vNet PoE Device & Logger
User PC
T1 18 °C
T2 4 °C
Wireless Logger
Vaisala Veriteq viewLinc 4.3
Quick Start Guide
Logger & USB
viewLinc Server
Company
Network
viewLinc Mobile
viewLinc Server
T1 18 ˚C
T2 4 ˚C
vNet PoE Device
and Logger