COMBO HEADSET
4. Using the Headset
After you have completed Steps 1
and 2 described in Sections 3.3.1
and 3.3.2, you are now ready to
use your headset.
4.1 Answering and Making Calls
1. To answer or make a call,
put on the headset, remove
the handset from its cradle,
and press the mute or the
volume button.
2. To end a call, replace the
handset in its cradle.
IMPORTANT: A
CTIVATING THE
-
BATTERY FROM POWER
SAVE MODE
1. To save battery power, your
headset is designed to
reduce power consumption
when the headset is not in
use. If your headset has
gone for 3 minutes without
use, it will automatically go
16
from full power or "active"
mode to "stand-by" mode. It
will stay in stand-by mode
for 30 minutes. If the unit is
not reactivated within the
30 minute period, it will
automatically drop to
"sleep" mode (a further
power reduction from the
stand-by mode)
2. A dial tone or sound on the
telephone line will
automatically reactivate
from stand-by mode. To
manually reactivate from
stand-by mode, or to
reactivate from the sleep
mode, press the mute or
volume buttons
(Figure 4-1).
Figure 4-1. Mute and Volume Buttons.
4.2 Adjusting the Receive Volume
1. To turn the headset sound
volume up or down, press
the upper (+) or lower (-)
part of the oval volume
control button until you
find the desired level. When
you reach the maximum or
minimum sound level, you
will hear a signal (Figure
4-2).