Table of Contents
Advertisement
Figure 3-13. Pressing the Mute Button.
3. Increase or decrease
microphone volume by
pressing the upper (+) or
lower (-) part of the oval
volume control button until
the other person hears you
clearly. You will hear a signal
each time you adjust the
volume. When you reach
the maximum and
minimum sound levels, you
will also hear a signal
(Figure 3-14).
Figure 3-14. Adjusting the Microphone
Volume.
4. Press the mute button again
to exit the setup mode. If
you forget, the headset will
automatically exit the setup
mode after 10 seconds
(Figure 3-13).
+
CHAPTER 3: Installation
15
Advertisement
Table of Contents
