Keithley DMM6500 Quick Start Manual page 11

To connect the power cord:
1.
Connect the supplied power cord to the AC receptacle on
the rear panel.
2.
Connect the power cord to a grounded AC outlet.
To turn a DMM6500 on:
1.
Disconnect any devices under test (DUTs) from the
DMM6500.
2.
Press and hold the POWER switch for two seconds. The
indicator next to the POWER switch shows amber in the
off state and green in the on state when connected to the
power source.
The instrument displays a status bar as the instrument
powers on. The home screen is displayed when the power on
is complete.
To turn a DMM6500 off:
Press and hold the front-panel POWER switch.
To keep users safe, always read and follow all safety
warnings provided with each of the instruments in your
system.
Connect