LOGICDATA SILVERlite Owner's Manual page 16

STEP 5: MOUNTING THE BASE PLATFORM
CAUTION
Risk of minor or moderate injury through tripping
While mounting the Platforms, you may have to step over the Power Cable. Tripping over the
Cable may lead to injury.
• Be careful not to trip over the Cable
4x
H
16 //ADJUSTABLE BED FRAME - OWNER'S MANUAL
I
N
A
H
B
1. Lay the Base Platform
(H) upside down across
the Bed Frame. The Net
should face upwards.
2. Lay the Control Box (I) in-
side the Net on the Base
Platform.
1. Turn over the Base Plat-
form (H) and lay it flat
across the center of the
Bed Frame. The Net
should face downwards.
2. Ensure that the Platform
is correctly positioned.
There should be 3 Mount-
ing Holes on each Side
Rail (A, B) either side of
the Platform.
3. Use 4 Platform Screws (N)
to fix the Platform by hand.
Turn each screw until it is
hand-tight.