Intermec PB2 Series Instructions page 2
Protective case instructions
Hide thumbs
Also See for PB2 Series:
- User manual (38 pages) ,
- Quick start manual (2 pages) ,
- Supplementary manual (2 pages)
Advertisement
To insert the printer into the protective case
Unzip the main flap on the protective case and insert the printer with the
1
control panel facing upward.
2
Close the zippers on the protective case and secure the flap over the printer. You
can:
open the media flap to print labels while the printer is in the case.
•
•
open the card reader flap to use the card reader.
•
open the communications flap to attach a power cable, USB cable, or a serial
cable to the printer.
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
© 2010 Intermec Technologies
Corporation. All rights reserved.
PB2X and PB3X Protective Case Instructions
*943-223-002*
P/N 943-223-002
Media flap
Communications flap
Card reader flap
Advertisement
