Angle Mark; Smart Picture; Picture Setting - Philips DVP520/02 User Manual

System Menu Options

Angle Mark

Displays current angle setting information
on the right hand corner of the TV screen
if available on the disc.
1
Press 34 to highlight 'Angle Mark'.
2
Enter its submenu by pressing 2.
3
Move the cursor by pressing 34 to
highlight the selected item.
On: Enable Angle Mark.
Off: Disable the current angle setting
display.

Smart Picture

In this menu, you can choose a picture
setting from a fixed set of predefined
picture settings.
1
Press 34 to highlight 'Smart Picture'.
2
Enter its submenu by pressing 2.
3
Move the cursor by pressing 34 to
highlight the selected item.
Standard: select the standard picture
setting.
Bright: make the TV picture brighter.
Soft: make the TV picture softer.
28
01-34 DVP520_02a1

Picture Setting

The options included in Picture Setting
Setup page are: 'Sharpness', 'Brightness'
and 'Contrast'.
1
Press the 34 keys to highlight an option.
2
Enter its submenu by pressing 2.
3
Move the cursor by pressing the 34 keys
to highlight the selected item.
Sharpness
You can personalise your picture colour
by adjusting sharpness, brightness or
contrast.
High: Choose high to make the
picture's edge sharper.
Medium: Choose medium to get a
standard picture.
Low: Choose low to make the
picture's edge softer.
Brightness/Contrast
Choose a positive value to increase the
brightness/contrast level or move to a
negative value to decrease the brightness/
contrast level.
28
- - Picture Setting Setup - -
Sharpness High
Brightness 00 Medium
Contrast 00 Low
Low
02(A)_8239 210 98882
18/03/2004, 6:31 PM