Dolby Digital Setup - Philips DVP520/02 User Manual

LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
48kHz: Playback a disc recorded at the
sampling rate of 48kHz.
96kHz: Playback a disc recorded at the
sampling rate of 96kHz.
Helpful Hint:
– LPCM Output can be selected only when
PCM Only is activated.
01-34 DVP520_02a1
System Menu Options

Dolby Digital Setup

The options included in Dolby Digital
Setup are: 'Dual Mono' and 'Dynamic'.
1
Press the 34 keys to highlight an option.
2
Enter its submenu by pressing 2.
3
Move the cursor by pressing the 34 keys
to highlight the selected item.
Dual Mono
To select the setting that matches the
number of speakers you have connected.
Stereo: Left mono sound will send
output signals to Left speaker and Right
mono sound will send output signals to
Right speaker.
L-Mono: Left mono sound will send
output signals to Left speaker and Right
speaker.
R-Mono: Right mono sound will send
output signals to Left speaker and Right
speaker.
Mix-Mono: Left and Right mixed
mono sound will send output signals to
Left and Right speakers.
Dynamic
To optimise the dynamic sound output
high volume outputs are softened,
enabling you to watch your favourite
movie without disturbing others.
The levels for dynamic selection:
Full, 3/4, 1/2, 1/4 and Off.
Helpful Hint:
– DTS surround audio output are not
available in this DVD player.
25
- - Dolby Digital Setup - -
Dual Mono Stereo
Dynamic L-Mono
R-Mono
MIX-Mono
Dual Mono (1 + 1) Setup
02(A)_8239 210 98882
18/03/2004, 6:31 PM
25