Angle Mark; Osd Lang; Screen Saver; Video Out Setup - Philips DVD580MT98 User Manual

Angle Mark

ON: Current angle setting will be display on the
right hand side of the screen.
OFF: Disable the current angle setting display.

OSD Lang

There are two options available for information
display on the TV screen.
ENGLISH: OSD information will be displayed in
English.
CHINESE: OSD information will be displayed in
Chinese.

Screen Saver

This function is used to turn on or off the screen
saver.
ON: At stop mode, screen saver will turn on
within 2 seconds.
OFF: Screen is disable.

Video Out Setup

--- VIDEO OUT SET PAGE --- --- VIDEO OUT SET PAGE ---
--- VIDEO OUT SET PAGE --- --- VIDEO OUT SET PAGE ---

VIDEO OUT

VIDEO OUT VIDEO OUT VIDEO OUT
MAIN PAGE MAIN PAGE MAIN PAGE MAIN PAGE
SETUP VIDEO OUT FEATURE SETUP VIDEO OUT FEATURE SETUP VIDEO OUT FEATURE SETUP VIDEO OUT FEATURE
Video Out
S-Video: Video signal will send an output from
the S-Video on the rear panel of the DVD player
to the TV.
YC C : If your TV is equipped with YCbCr input,
B R
choose this feature to obtain higher picture
quality.
(S-)VIDEO (S-)VIDEO
(S-)VIDEO (S-)VIDEO
YCBCR YCBCR YCBCR YCBCR

Channel setup

This menu contains setup options for your
speaker system to reproduce high quality
surround sound.
- - CHANNEL SETUP PAGE - - - - CHANNEL SETUP PAGE - - - - CHANNEL SETUP PAGE - - - - CHANNEL SETUP PAGE - -

DOWNMIX

D O W N M I X D O W N M I X DOWNMIX
CENTER CENTER
CENTER CENTER
REAR REAR REAR REAR
SUBWOOFER SUBWOOFER
SUBWOOFER SUBWOOFER
CNTR DELAY CNTR DELAY CNTR DELAY CNTR DELAY
REAR DELAY REAR DELAY
REAR DELAY REAR DELAY

TEST TONE

TEST TONE TEST TONE TEST TONE
LOAD CHANNEL SETUP LOAD CHANNEL SETUP
LOAD CHANNEL SETUP LOAD CHANNEL SETUP
Downmix
LT/RT: Select this settings when the DVD player
is connected to a Dolby Prologic decoder which
send a signal output from the DVD player.
STEREO: This setting will downmix the signal of
Dolby Digital and DTS into stereo signals directly
output from front L/R connector.
VSS: Allows the DVD player to reproduce virtual
surround sound effects.
OFF: To disable the DOWNMIX mode.

Centre / Rear / Subwoofer

Set DOWNMIX mode and Karaoke mode to
OFF to enable this settings.
ON: Enable signal output for centre/rear/
subwoofer speaker.
OFF: Disable signal output for centre/rear/
subwoofer speaker.

Cntr Delay / Rear Delay

Set Centre Delay or Rear Delay mode to ON in
the menu to delay the sound reproduction from
the speakers.
Test tone
This setting is used to varify the audio system
connection. When TEST TONE is ON, some
sound can be heard from every speaker.
ON: Enable the test tone.
OFF: Disable the test tone.
Setup Menu
LT/RT LT/RT
LT/RT LT/RT
STEREO STEREO
STEREO STEREO
VSS VSS VSS VSS
OFF OFF
OFF OFF
17