Factory Settings On Delivery; Technical Data - MB Connect Line mbNET.mini Series Quick Start Up Manual

Factory settings on delivery

The mbNET.mini is delivered with the following factory settings:
IP Address
Subnet Mask
Username
Password
ADVICE! Change unconditionally and without delay the default login information!

Technical Data

Voltage
Power (@ 24 V)
* 250 mA = operating current, max. 1.8 A under full load (USB interface + switched outputs I/O 1 and I/O 2).
** at full occupancy of all connections and interfaces. Alternatively, unused interfaces can be covered
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, MB connect line GmbH declares that the radio equipment
type MDH 861; -862 EU; -863; -865; -866; -867 is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
The device types MDH 862 AT&T and MDH 866 AT&T are not
CE marked and must not be operated or commissioned in the
European Economic Area (EEA)!
22
192.168.0.100
255.255.255.0
admin
(no password needed)
10 – 30 V DC
250 mA (max. 1,8 A*)
www.mbconnectline.com
NOTICE
Protection class
Area of application
MB connect line GmbH
Fernwartungssysteme
Winnettener Str. 6
91550 Dinkelsbühl
Germany
+ 49 (0) 700 / MBCONNECT
+ 49 (0) 700 / 62 26 66 32
www.mbconnectline.com
© MB CONNECT LINE 2007 - 2019
IP 30**
Dry environment
with dust protection plugs.
PROG. CNTLR.
E482663