Table of Contents
Advertisement
Modbus TCP – Modbus RTU
TM
Intesis
3 Set-up process and troubleshooting
Pre-requisites
It is necessary to have a Modbus TCP client device operative and well connected to the corresponding Modbus port
of Intesis and a Modbus RTU slave connected to its corresponding port as well.
Connectors, connection cables, PC to use the configuration tool and other auxiliary material, if needed, are not
supplied by HMS Industrial Networks S.L.U for this standard integration.
Items supplied by HMS Networks for this integration are:
•
Intesis gateway.
•
Link to download the configuration tool.
•
Product documentation.
Intesis MAPS. Configuration & monitoring tool for Intesis Modbus series
3.2.1 Introduction
Intesis MAPS is a Windows
series.
The installation procedure and main functions are explained in the Intesis MAPS User Manual. This document can
be downloaded from the link indicated in the installation sheet supplied with the Intesis device or in the product
website at
www.intesis.com
In this section, only the specific case of Modbus Router systems will be covered.
Please check the Intesis MAPS user manual for specific information about the different parameters and how to
configure them.
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
®
compatible software developed specifically to monitor and configure Intesis Modbus
User Manual r1.1 eng
URL
https://www.intesis.com
9 / 17
Advertisement
Table of Contents
Need help?
Do you have a question about the Intesis Modbus TCP and is the answer not in the manual?
Questions and answers