Reset The Module - Quectel NB-IoT Module Series Hardware Design

3.7.3. Reset the Module

Driving the reset pin to a low level voltage for a certain period of time will reset the module.
Table 8: Reset Pin
Pin Name Pin No.
RESET 15
The recommended circuits of resetting the module are shown below. An open drain/collector driver or
button can be used to control the RESET pin.
Reset pulse
Figure 9: Reference Circuit of RESET by Using Driving Circuit
BC66_Hardware_Design
TBD
VBAT
VDD_EXT
Module
RUNNING
Status
Figure 8: Turn-off Timing
Description
Reset the module.
Active low.
4.7K
BC66 Hardware Design
OFF
Reset Pull-down Time
TBD
RESET
47K
NB-IoT Module Series
23 / 50