Table of Contents
Advertisement
Errors
The door cannot be opened. Rinse Hold
The water is not draining.
Water is not flowing in. De-
tergent is not being dis-
pensed.
Cause
is activ-
ated.
The temperature is too high.
Water level is too high.
Power failure.
Drain pipe or water outlet
hose is blocked.
Drain pipe or water drain
hose is caught or jammed.
Drain pump is blocked.
Rinse Hold
is activ-
ated.
The water outlet hose is con-
nected too high.
You have not pressed Start /
Reload.
The filter in the water inflow
is blocked.
The tap is turned off.
The water inlet hose is
kinked or jammed.
www.devicemanuals.eu/
Troubleshooting en
Troubleshooting
Continue the programme by select-
▶
ing Spin or Drain and pressing
Start / Reload.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 44
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 43
Start the Drain programme.
▶
Open the door using the emergency
▶
release.
→ "Emergency release", Page 64
Clean the drain pipe and the water
▶
outlet hose.
Ensure that the drain pipe and wa-
▶
ter drain hose are not kinked or
trapped.
→ "Cleaning the drain pump",
▶
Page 52
Continue the programme by select-
▶
ing Spin or Drain and pressing
Start / Reload.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 44
Install the water outlet hose at a
▶
maximum height of 1 metre.
→ "Technical specifications",
Page 69
Press Start / Reload.
▶
Clean the water inflow filter
▶
→ Page 55.
Turn on the tap.
▶
Ensure that the water inlet hose is
▶
not kinked or jammed.
59
Advertisement
Table of Contents
