Table of Contents
Advertisement
en Basic settings
Basic settings
You can configure the appliance to
meet your needs.
Overview of the basic settings
Below is an overview of the basic set-
tings on the appliance.
Basic setting
end signal
button signal
auto power-off
Drum clean advice
Language
Aut. network log-in
Man. network log-in
50
Description
Set the volume of the
signal at the end of
the programme.
The volume of the
audible signal emitted
when the buttons are
pressed.
Activate or deactivate
the "Automatic switch-
off" function for the
appliance or set the
time after which the
appliance automatic-
ally switches itself off.
→ "Save energy and
conserve resources",
Page 12
Note: If Wi-Fi is activ-
ated, the appliance
will not switch itself
off automatically.
Activate or deactivate
the reminder to clean
the drum.
Set the language.
Connect the appli-
ance to a WLAN home
network (Wi-Fi) with
WPS function
→ Page 45
Connect the appli-
ance to a WLAN home
network (Wi-Fi)
without WPS function.
→ Page 46
Basic setting
Connect app
Wi-Fi on/off
Software update
Network settings
energy mngmt.
Changing the basic settings
To call up the basic settings for
1.
the sub-menu, press and hold both
buttons Basic Settings 3 sec. for
approx. 3 seconds.
Select the required basic setting.
2.
→ "Overview of the basic settings",
Page 50
Adjust the basic setting.
3.
Press Basic Settings 3 sec. to call
4.
up the main menu.
www.devicemanuals.eu/
Description
Connect your appli-
ance to the Home
Connect app
→ Page 47.
Activate or deactivate
Wi-Fi.
→ "Activating Wi-Fi on
the appliance",
Page 48
→ "Deactivating Wi-Fi
on the appliance",
Page 48
Install the software
update. → Page 48
Reset the network set-
tings. → Page 48
Connect the appli-
ance to the energy
manager. → Page 47
Advertisement
Table of Contents
