D-Link NUCLIAS CONNECT DAP-2680 User Manual page 22

Web User Interface
WPA Mode When Authentication setting is set to WPA-
Enterprise, click the drop-down menu to select
one of the following: Auto (WPA or WPA2),
WPA2 Only, or WPA Only.
Auto (WPA or WPA2) allows the device to select
either setting to match the client configuration.
Cipher Type Click the drop-down menu to select the cipher
type for the WPA setting, type: Auto, AES, or
TKIP.
Group Key Update Enter the interval period in seconds in which the
Interval
interval period is valid.
Network Access Click the radio button to enable or disable
Protection
Microsoft Network Access Protection.
RADIUS Server Mode:
Choose either external or internal.
RADIUS Server Enter the IP address of the RADIUS server to be
used to authenticate.
RADIUS Port Enter the RADIUS port.
RADIUS Secret Enter the shared secret to be used between the
radius server and the DAP to authenticate.
Accounting Mode Click the drop-down menu to enable or disable
the accounting mode.
Accounting Server
Enter the IP address of the accounting server.
Accounting Port Enter the accounting port.
Accounting Secret
Enter the accounting secret.
Save
Click to save the updated configuration.
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-2680 User Manual 22