Configure For Country/Region And Model (Function Code 74) - Ricoh SP 230SFNw Service Manual

1.3.20 Configure for country/region and model (Function code 74)

<Function>
This function is used to customize the machine according to language and function settings.
<Operating Procedure>
(1) Press the [7], and then the [4] in the initial state of maintenance mode. For models
without keypad, press the [▲] or [▼] to display "MAINTENANCE 74" on the LCD and
press the [OK]. The spec code currently set is displayed on the LCD.
(2) Enter the spec code (four digits) you want to set.
For models without keypad, the first digit starts flashing. Press the [▲] to enter "1", or
[▼] to enter "0" to select the number for the first digit and press the [OK]. The second
digit starts flashing. Select the number by repeating the procedure above. The second
digit is completed and the fourth digit starts flashing. Press the [▲] or [▼] to display
numbers for the third and fourth digit on the LCD, then press the [OK].
(3) Press the [Start] or [Mono Start] to save the new setting, and "PARAMETER INIT" is
displayed on the LCD. The machine then returns to the initial state of maintenance
mode.
Note:
If there is no entry for one minute or longer, the machine returns to the initial state of
maintenance mode automatically, regardless of the display status.
 Setting by spec code list
ASA
Australia
Austria
Belgium
Bulgaria
Country Code Country Code (Detail)
0091 Hong Kong
Malaysia
Singapore
Sri Lanka
Thailand
Philippines
Australia
Austria
Belgium
Luxembourg
Bulgaria
5-35
0040
0040
0040
0040
0040
0040
0006
0014
0008
0008
0032
Confidential