Menu Background Settings - Team HAM MobileCom 1011 Manual

1. Push and hold the key【MENU】(5) for appr. 2 seconds to open the menu.
2. Turn the rotary channel selector (14) to make your selection.
3. Push the key【PUSH】(14) to access the available settings for the function.
4. Turn the rotary channel selector (14) to make your selection.
5. Confirm the selection by pressing the key【PUSH】(14).
6. Press any key to exit the menu.
No. Function
1 BEEP
2 INDIC
3 MIC
4 NOG
5 TOT
6 TSR
7 TDC
8 SCM
9 FIN
10 COLOR
11 TX REP
12 FR--CH
13 ASQ
14 RESET
26

MENU BACKGROUND SETTINGS

LCD Symbol settings and description
BP beep tone; confirms any entry; ON / OFF
OFF
SWR
TOT
DC
microphone sensitivity; 1-36
monitor sensitivity; 1-32, OFF
transmit time limiter; OFF, 30-600s in 30-seconds-steps
SWR protection, protects the radio if SWR is out of limit;
ON / OFF
limit has to be programmed via software
Voltage protection, protects the radio if voltage is out
of limits; ON / OFF
min. and max. limits, to be programmed via software
channel scan types
SQ
TI
frequency fine-tuning
OFF
R
T
RT
LCD color
WHITE, BLUE, GREEN, YELLOW,
RED, PURPLE, CYAN
for repeater operation, tx frequency shift
range: 100Hz - 5MHz
settings:
reset to factory settings
OPT
ALL
: transmit frequency during transmission
: SWR during transmission
: remaining TOT time during transmission
: indicates voltage during transmission
: signal
: time
: reception frequency fine-tuning
: transmission frequency fine-tuning
: reception and transmission fine-tuning
CHAN
FREQ
automatich squelch
preset in the range 1-9
: all settings and functions
: all frequencies, settings and functions