Team HAM MobileCom 1011 Manual page 24

add to/delete from scan list
In channel mode, only the channels of the scan list will be scanned. Channels that are
added to the scan list can be recognized by the letter SC (4) in the lower, left corner. To
add a channel to the scan list (or delete it), hold the key【SCAN】(6) for approximately 2
seconds.
The scan list can also be edited via the menu channel settings.
[DW]
Dual-Watch On/Off
Pressing shortly the key【DW】(7), will activate the dual watch function. Once activated, the
symbol DW (10) appears.
Setup Dual Watch function
1. Select the first channel for the dual watch function.
2. Hold the key【DW】(10) for appr. 2 seconds until the symbol DW starts blinking.
3. Now, set the second channel for the dual watch function and press again the key【DW】
(10) for confirmation.
[EMG]
priority channels 9/19 and key lock
priority channel 9/19:
The tri-state key【EMG】(15) switches from priority channel 9 to priority channel 19 and then
back to regular mode. The priority channels 9 and 19 are indicated by the symbol EMG (15).
key lock:
To activate the key lock function, which deactivates all keys except for the PTT key, hold the
key【EMG】(15) for approximately 2 seconds until the key symbol (17) appears.
24