Page 2
Schaltplan / Schematic Diagram / Schéma de principe / Schema elettrico ( Front PCB ) Blockschaltbild / Block Diagram Technische Daten / Technical Data / SelCom 8012 Technische Daten / Technical Data / SelCom 4040 Ersatzteile / Spare parts 42 - 43...
Page 3
TEAM SelCom 8012 / SelCom 4040 VOLUME SQUELCH CHANNEL TEA M SelCom 8012 CALL A/ F DW FRQ CH9 DC 13.8V EXT SP EXT S- METER - 3 -...
Page 4
TEAM SelCom 4040 OPERATION CONTROLS, DISPLAYS AND CONNECTORS ( 1 ) Squelch control [ SQUELCH ] ( 2 ) Volume control / ON switch [ VOLUME / ON ] ( 3 ) LCD display window for channel number, frequency, functions and...
Page 5
The actual modulation type is indicated by the symbols [ FM, AM ] in the display ( 3 ). With the TEAM SelCom 4040 all 40 channels can be selected both in AM and in FM mode. In FM mode the transmit output power is 4 W and in AM mode it is 1 W.
Page 6
The actual modulation type is indicated by the symbols [ FM, AM ] in the display ( 3 ). With the TEAM SelCom 4040 all 40 channels can be selected both in AM and in FM mode. In FM mode the transmit output power is 4 W and in AM mode it is 1 W.
( 3 ), forming progressive bar sections. The TEAM SelCom 4040 has on its rear panel a socket ( 20 ) EXT S-METER for the connection of an additional S-meter with a 2.5 mm plug.
Page 8
9. External speaker [ EXT SP ] : The TEAM SelCom 4040 has on its rear panel a socket ( 18 ) [ EXT SP ] for an external speaker of 4 - 8 ohm impedance with 3.5 mm plug. At 4 ohms the dissi- pation of the speaker can be up to 2 watts.
Page 9
calling station and the reception code of the listening station have to match. In our example the head office has to change its transmission code to reach every participant in case of individual call. The same applies to the mobile stations if they want to reach each other.
Page 10
12. Battery backup : As long as the TEAM SelCom 4040 is connected without any interruption to a car battery or a switched on power supply the memory contents of selective call codes and channels will be kept stored, even when it is switched off at ( 2 ) [ VOLUME / ON ].
TECHNISCHE DATEN / TECHNICAL DATA TEAM SelCom 8012 Kanalnummern und Frequenzen nach BAPT 222 ZV 102 / 104 ( 80 Kanäle ) Kanal Nr.- Frequenz Kanal Nr. - Frequenz Kanal Nr. - Frequenz Kanal Nr. - Frequenz Channel Nbr. - Frequency Channel Nbr.- Frequency...
Need help?
Do you have a question about the SelCom 8012 and is the answer not in the manual?
Questions and answers