Table of Contents
Advertisement
Tool assembly
Place the seal on the tool�
Removing the tool assembly
Protect the worktop and turn
the bowl upside down�
Use the cap to unscrew the
nut�
Put the seal on correctly:
assembly can lead to leaks and damage the appliance�
Wear and tear of seals:
damage or leaking, replace immediately�
Lid:
examine regularly� Replace immediately if there are any cracks or chips or in the
case of severe impact�
Burns:
always put the cap on the lid during use, particularly with hot food� If you need
to add ingredients during processing, always press Stop first, add the ingredients, then
press Auto� When the cap is hot, always remove using the central plastic part�
Respect the maximum amounts:
MAX in all other cases� Never exceed the maximum amounts�
UNIVERSAL TOOL
Insert the tool into the hole at
the bottom of the bowl� Turn
the bowl upside down while
holding the tool firmly in place�
Unscrew the cap in clockwise
direction� This releases the
tool�
check that it is positioned and tightened properly� Incorrect
check seals regularly for wear� If they show signs of wear,
the maximum filling level for steaming is 0�5 L and
Position the screw on the
underside of the bowl and
tighten by hand or with the
cap�
Remove the seal from the tool
so it can be cleaned�
13
Hide quick links:
Advertisement
Table of Contents
