Connect To Power Outlet - Philips DVP3316/94 User Manual

Connect to digital ampliÀ er/receiver
DIGITAL
OUT
COAXIAL
1
Connect a coaxial cable (not supplied)
to the COAXIAL/DIGITAL OUT jack
on this DVD player and the COAXIAL/
DIGITAL input jack on the device.
Tip
•
You can optimize the audio output (see
chapter 'Adjust settings' - [Audio Setup] >
[Digital Output] ) for details.
Connect to analog stereo system
FRONT L
FRONT R
1
Connect the audio cables (supplied) to
the AUDIO OUT FRONT L/R jacks on
this DVD player and the audio input jacks
on the device.
DIGITAL IN
AUDIO IN

Connect to power outlet

Warning
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the DVD player.
1
Connect the power cord to the power
outlet.
»
The DVD player is ready to be set up
for use.
EN 11