Turn On Progressive Scan - Philips DVP3316/94 User Manual

Turn on Progressive Scan

Connect a progressive scan TV with component
video jacks (see chapter 'Connect video cables
- Option 1: Connect to component video jacks'
for details).
Video Setup
TV System
TV Display
Picture Setting
Component Video
1
Turn on the TV to the correct viewing
channel for this DVD player.
2
Press SETUP .
3
Press to select [Video Setup] .
4
Select [Component Video] > [P-Scan] ,
then press OK .
»
A warning message is displayed.
5
To proceed, select [Yes] and press OK .
»
The progressive setup is complete.
Note
•
If a blank/distorted screen is displayed, wait for
15 seconds for the auto recover.
•
If no picture displayed, turn off the progressive
scan mode as follows: 1) Press to open the
disc compartment. 2) Press the Numeric
button '1' .
6
Press SETUP to exit the menu.
7
You can now turn on the progressive
scan mode on the TV (see the TV user
manual).
14 EN
Interlaced
P-Scan
Note
•
During play, when progressive scan mode is on
for both this DVD player and the TV, distorted
picture may display. Turn off the progressive
scan feature on both this DVD player and the
TV.