Connect to digital ampliÀ er/receiver
DIGITAL
OUT
COAXIAL
1
Connect a coaxial cable (not supplied) to
the COAXIAL/DIGITAL OUT jack on this
DVD player and the COAXIAL/DIGITAL
input jack on the device.
Tip
•
You can optimize the audio output (see chapter
'Adjust settings' - [ Audio Setup ] > [ Digital Audio
]) for details.
Connect to analog stereo system
FRONT L
FRONT R
1
Connect the audio cables (supplied) to the
AUDIO OUT FRONT L/R jacks on this
DVD player and the audio input jacks on
the device.
Tip
•
You can optimize the audio output (see chapter
'Adjust settings' - [ Audio Setup ] > [ Analog Output
]) for details.
Downloaded From Disc-Player.com Philips Manuals
DIGITAL IN
AUDIO IN
Connect USB device
1
Connect the USB Á ash drive to the
(USB) jack on this DVD player.
Note
•
This DVD player can only play/view MP3, WMA,
DivX or JPEG À les that are stored on such devices.
•
Press
to access the content and play the À les.
Connect to power outlet
Warning
•
Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the DVD player.
1
Connect the power cord to the power
outlet.
The DVD player is ready to be set up
for use.
11