Connect Usb Device; Connect To Power Outlet - Philips DVP3380/05 User Manual

Connect to analogue stereo system
1
Connect the audio cables (not supplied) to
the AUDIO OUT L/R sockets on this
DVD player and the audio input sockets
on the device.
Tip
•
You can optimise the audio output (see chapter
'Adjust settings' - [ Audio Setup ] > [ Analogue
Output ]) for details.
12 EN
AUDIO IN

Connect USB device

1
Connect the USB Á ash drive to the
(USB) socket on this DVD player.
Note
•
This DVD player can only play/view MP3, WMA,
DivX, JPEG or WMV À les that are stored on such
devices.
•
Press to access the content and play the À les.

Connect to power outlet

Warning
•
Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the DVD player.
1
Connect the power cord to the power
outlet.
The DVD player is ready to be set up
for use.