Table of Contents
Advertisement
Find the correct viewing
channel
1
Press
to turn on the DVD player.
2
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
•
Go to the lowest channel on your
TV, then press the Channel Down
button until you see the Philips
screen.
•
Press
SOURCE button repeatedly
on the remote control of your TV.
Tip
•
The video-in channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, VIDEO, HDMI etc.. See the
TV user manual on how to select the correct
input on your TV.
•
If the audio output of this DVD player is
routed to other audio device (such as audio
system or receiver), turn on the audio device
to the appropriate audio input channel. Refer
to the device user manual for details.
Select menu display language
General Setup
OSD Language
Auto Standby
1
Press SETUP .
» [General Setup] menu is displayed.
2
Select [OSD Language] , then press .
•
The language options are different
depending on your country or
region. It may not correspond to the
illustration shown here.
3
Press
to select a language, then press
OK .
Tip
•
You can set the default language for DVD
audio and disc menu, see chapter 'Adjust
settings' - [Preferences] for details.
English
EN
13
Advertisement
Table of Contents
