Connect to analog stereo system
1
Connect the audio cables (supplied) to the
AUDIO OUT L/R jacks on this DVD
player and the audio input jacks on the
device.
Tip
You can optimize the audio output (see chapter
[ Audio Setup ]
]) for details.
AUDIO IN
[ Analog Output
Connect USB device
1
(USB) jack on this DVD player.
Note
This DVD player can only play/view MP3, WMA,
Press
Connect to power outlet
Warning
Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the DVD player.
1
Connect the power cord to the power
outlet.
The DVD player is ready to be set up
for use.
EN
11