Additional Functions - Electrolux QuickDry N1130 Operating Manual

Handling
10

3.2 Additional functions

Pause
It is possible to pause an ongoing program.
Press the control knob. A meny will appear on the display. Select PAUSE by turning the control
knob and press the control knob to activate.
For some machines it is also possible to pause directly when pressing the control knob.
When pressing the control knob again the program will continue.
Changing a program after start
It is possible to change a program after start.
Press the control knob. A meny will appear on the display. Select CHANGE PROGRAM by turning the
control knob and press the control knob to activate.
When pressing the control knob the program menu will be displayed. Select a new program and
start by pressing the control knob.
End a program
It is possible to end a program after start.
Press the control knob. A meny will appear on the display. Select END PROGRAM by turning the
control knob and press the control knob to activate.
When pressing the control knob the program will be ended.
Status
Press the control knob. A meny will appear on the display. Select STATUS MENU by turning the
control knob and press the control knob to activate.
The status menu shows the status for inlet air temp, outlet air temp, RMC and heat for the machine.
Statistics
Press the control knob. A meny will appear on the display. Select STATISTICS by turning the
control knob and press the control knob to activate.
The statistics menu shows total run hours and trip run hours for the machine.
Change drum speed (only on machines with MCU)
Press the control knob. A meny will appear on the display. Select CHANGE DRUM SPEED by turning
the control knob and press the control knob to activate.
Change the drum speed with the control knob.
Note!
Some of the functions may not be available or active on your machine.